Portable Wireless Microphone SYNCO G2(A1)

The SYNCO G2(A1) is a portable wireless microphone of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. Similar to the G1, the G2 wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2). The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.

Brandnew TFT Display as Strong Boost to SYNCO Portable Microphone Wireless at 2.4 GHz

Different from G1, either the transmitter or the receiver of this new microphone wireless at 2.4G carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable.  

Upgraded Algorithm for More Stable, Safe Transmission

The Syncoder^TM Encrypted Transmission Algorithm 4.0 in this professional small wireless microphone enhances the signal stability within 656ft/200m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

Small Features Packed For Each Optimization

A button is designed to mute this portable wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The one-click noise reduction, gain control on both transmitter & receiver, and real-time monitoring of recorded & input sounds function to give a wider range of adjustment, hence making sure that the system works under more conditions.

Safety Channel Mode for Audio Backup

The G2(A1) comes with two recording modes - Mono mode and Safety Channel mode. The Safety Channel mode is activated by a press on the On/Off button of the receiver. The audio recorded to the right channel is 6dB lower under this mode, thus avoiding audio spikes and offering audio backup.

Integrated Signal Processing for Little Latency Sound Production

The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.

Quick Charge for Every Continued Filming

The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.  

Wireless Clip on Mini Microphone for Invisible but Audible Effect

Mobile content creators would like the mini wireless microphone for mobile G2(A1). The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, easy to be concealed and inconspicuous in most recording scenarios. The G2(A1) comes with TRS output and universal digital Type-C output, ensuring wide compatibility with smartphones, computers, cameras, and even loudspeakers.

The back clip of the transmitter and receiver is upgraded with magnetic suction. In addition to the collar and camera, the transmitter can be directly adsorbed on the metal surface. With the included magnets, you can hide the TX under your clothes for low-profile recording.