SYNCO EasyGo for Xtalk Series Only
The SYNCO EasyGo is a computer-based tool for SYNCO Xtalk wireless intercom headsets. It helps users quickly update and pair SYNCO headsets, continuously enhances performance, and connects the entire SYNCO intercom headset series.
Check the video to learn how to use it and download the tool and firmware below to finish the updating or pairing.
Download SYNCO EasyGo
- Xtalk EasyGo_EN_1.0.9
Note: SYNCO EasyGo only works with Windows 10/Windows 11.
Read the notes to ensure successful update
1. Firmware Version Confirmation
Please ensure the firmware package version matches your Xtalk system series (X Series/XPro Series). Mismatched versions may damage the device.
2. Firmware/Voice Pack Update
Please use a USBC cable that supports data transfer for connection.
When using the SYNCO EasyGo to update firmware for the first time, please:
①Connect the headset to the SYNCO EasyGo, and choose BOTH firmware and voice pack simultaneously.
②Long press the "+" and "-" buttons on Xtalk headset.
③After hearing "beep beep"→"beep", release the Button "+" first, then Button "-", and IMMEDIATELY click "Install".
Note: ①No need to repeat the above steps for the next update;
②ALL headsets are required for the upgrade operation.
If the update is interrupted due to disconnection, please unplug and reconnect the data cable to continue the update.
3. Pairing Considerations
①When pairing headsets from different series, the LOW version firmware can only connect with other LOW version firmware.
Example: The X Series uses X5_BP_LOW_1.1.3.1, while the XPro Series uses X5_PRO_LOW_1.1.3.0. (The word LOW refers to low latency.)
②If pairing exceeds 5 devices, maintain a distance of at least 50cm between headsets when pairing and using to avoid signal interference.
③Headsets with low-latency firmware cannot pair with the Xtalk Link.
Download the firmware according to your product model
- X5_BM_1.0.3.1.bin
"Xtalk Firmware (for 5 units) V1.0" only compatible with X series;
Connect up to 5 headsets;
Default Boost Mode: Mode 2;
Available for pairing with the XPro headset (Except for LOW Ver.).
- X5_BM_LOW_1.1.3.1.bin
"Xtalk Low Latency Version Firmware (for 5 units) V1.0" only compatible with X series;
Connect up to 5 headsets;
80ms Latency;
Default Boost Mode: Mode 2;
Available for pairing with the XPro headset (For LOW Ver. Only).
- X9_BM_2.0.0.3.bin
"Xtalk Firmware (for 13 units) V1.0" only compatible with X series;
Connect up to 13 headsets;
Default Boost Mode: Mode 2;
Available for pairing with the XPro headset (Except for LOW Ver.).
- X9_BM_LOW_2.1.0.3.bin
"Xtalk Low Latency Version Firmware (for 13 units) V1.0" only compatible with X series;
Connect up to 13 headsets;
180ms Latency;
Default Boost Mode: Mode 2;
Available for pairing with the XPro headset (For LOW Ver. Only).
- X5_PRO_1.0.3.0_.bin
"XPro Firmware (for 5 units) V1.0" only compatible with XPro series;
Connect up to 5 headsets;
Default Boost Mode: Mode 2;
Available for pairing with the X headset (Except for LOW Ver.).
- X5_PRO_LOW_1.1.3.0.bin
"XPro Low Latency Version Firmware (for 5 units) V1.0" only compatible with XPro series;
Connect up to 5 headsets;
80ms Latency;
Default Boost Mode: Mode 2;
Available for pairing with the X headset (For LOW Ver. Only).
- X9_PRO_2.0.0.4.bin
"XPro Firmware (for 13 units) V1.0" only compatible with XPro series;
Connect up to 13 headsets;
Default Boost Mode: Mode 2;
Available for pairing with the X headset (Except for LOW Ver.).
- X9_PRO_LOW_2.1.0.4.bin
"XPro Low Latency Version Firmware (for 13 units) V1.0" only compatible with XPro series;
Connect up to 13 headsets;
180ms Latency;
Default Boost Mode: Mode 2;
Available for pairing with the X headset (For LOW Ver. Only).
- EN_V100_tone_0511_105039_.bin
English voice pack
- JAP_V100_tone_0521_182004_.bin
Japanese voice pack
- CN_V100_tone_0508_203305_.bin
Chinese voice pack